Nghĩa của từ particleboard|particleboards bằng Tiếng Anh
noun
board made from compressed wood chips and shavings
Đặt câu với từ "particleboard|particleboards"
1. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.
2. In the production of wheather-proof particleboard alkali phenolic resins find application.
3. Residual cane fibre ( Bagasse ) is Burned as fuel or used as filler paper and particleboard.
4. The extraction of particleboards with water yielded nearly all the urea added to the glue.
5. It also can be said that the TPF particleboards are comparable to some synthetic phenol-formaldehyde (PF) resin exterior-type particleboards on the basis of contrast test and accelerated aging test.
6. Our wood Caskets and coffins are made of solid wood (they are not cardboard, particleboard or veneer).
7. • Burn only dry, seasoned wood — do not burn green, wet, treated, or painted wood, particleboard, or plywood.
8. For a three-layer, phenolic-resin-bonded particleboard, the stresses are calculated, using the finite-element-method.
9. High thickness swelling, high water absorption and low mechanical properties of gypsum particleboard limit its utilization in building construction.
10. The alkali content of particleboards bonded with phenolic resin can lead to problems after longer use due to its hygroscopicity and chemical reactivity.
11. The effect of raw material, adhesive and climatic conditions on the surface roughness and moisture content of uncoated particleboards was determined.
12. Technical specifications and economic conditions call for the use of aminoplast-compound resins (urea- and melamine-formaldehyde resins) for the manufacture of structural particleboards.
13. The investigations have shown that neither open-air weathering nor single accelerated weathering tests alone are suitable to estimate the moisture resistance and durability of exterior type particleboard adhesives.
14. Thermomechanical analysis (TMA) results indicate that simple post-treatment (such as some postcuring) conditions capable of improving the mechanical performance of aminoplastic resins-bonded particleboard without any degradation do indeed exist.